Accu-Chek NANO Informacje Techniczne Pobierz pdf (Strona 41)

You need the meter, a test strip, a lancing device with a drum loaded, and the AST cap (available

upon request from the ACCU-CHEK Customer Care Service Center).

2. Wash your hands and the test

site with warm, soapy water

and dry thoroughly.

3. Remove the black cap from the

lancing device by pulling it

straight o. It is not a twist cap.

The easiest way to do this is to

place your thumb to the side of

the notch as seen in the

illustration.

4. Put the AST cap on by lining up

the notched sections on the cap

and the lancing device.

1. To make sure the display is

working properly, turn o the

meter, then press and hold

to see the complete display. All

segments should be clear and

look exactly like the picture. If

any segments are missing from

the display, there may be a

problem with the meter.

Contact the ACCU‑CHEK

Customer Care Service Center

at 1‑800‑858‑8072.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 203 204

Brak uwag

Accu-Chek NANO Informacje Techniczne Strona 41